This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Mclennan adds smaller motor sizes and 400-step motors

30 August 2015

Mclennan has expanded its range of stepper motors from USA distribution partner Applied Motion Products with new smaller sized high-torque stepper motors in NEMA frame sizes 8, 11 and 14 as well as a range of 400 full step/revolution motors.

The new 0.9 degree stepper motors, featuring 400 full-steps or 800 half-steps per revolution with normal stepper drives, will provide smoother and quieter performance than the standard 1.8 degree motors in applications where microstepping drives are considered too elaborate, not available or where a basic half step drive is already specified.

The new compact NEMA motors are all 2-phase, 4-lead bipolar connected and range from size 8 (about 20 mm square) to size 14 (around 35 mm square). Throughout the range the motor length is from around 26 to 53mm with available holding torque from 1.5 to 18Ncm. The 0.9 degree motors are offered in NEMA frame sizes 14, 17 and 23.

Mclennan supply a complete range of compatible low-cost stepper drives and motion controls from AMP to complement the new motors, from the 2035 full and half step drive to the STR2 advanced microstepping drive which includes simple dip-switch parameter set-up.


Contact Details and Archive...

Print this page | E-mail this page