This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Speed sensors with plastic flange-mount housing

18 October 2015

Cherry Industrial Solutions modular system speed sensors offer a reliable and cost effective alternative to conventional sensors with metal housings.

The new sensors feature a plastic flange-mount housing and are suitable for many industrial applications, their modular design providing designers with a range of standard elements and interfaces from which a custom sensor can be configured to exact requirements.

The modular system uses differential Hall-chip sensor devices with a standard and fully-integrated magnetic circuit, and is capable of sensing speeds of up to 20,000 rpm. Electrical connection is via 2-wire, 3-wire, or 4-wire interfaces using output leads or a plug-in connector.

The cylindrical housing is available with diameters starting from 13mm and with a length from 20mm up to 80mm. The mounting flange with screw offers a high degree of flexibility in regards of position, angle and alignment.

The speed sensors have an operating temperature range from -40°C up to +150°C and the housing meets at least IP67 specifications. The sensors will operate from a dc supply in the range of 4.5 to 24V and are protected against over-voltage and reverse-voltage connection.

Contact Details and Archive...

Print this page | E-mail this page