This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Morgan brings industry-leading ceramics to HIFU transducers

13 December 2015

Morgan Advanced Materials now has the capability to design and manufacture components for use in high intensity focused ultrasound (HIFU) technologies, particularly for medical applications.

Morgan is producing HIFU ultrasound transducers in a range of shapes and geometries, from 5mm to 150mm in diameter and with frequencies between 200kHz and 8MHz. The transducers are made from a modified range of hard piezoelectric (PZT) materials, which have been developed from Morgan's own proprietary range of ceramics. Other piezoelectric formulations are available on request depending on the ultrasonic power level required in the application.

HIFU is used in a range of applications, including the treatment of uterine fibroids, cancer research and cosmetic therapies. In HIFU, ultrasound beams emanate from the PZT transducer, heating or agitating the target tissue. As a result, the tissue is destroyed by coagulation necrosis.

The operating frequencies used can vary widely, according to the area of the body being treated. In general, the lower the frequency, the deeper the penetration of the focused ultrasound; cysts, for example, require lower frequencies, from 250KHz to 2MHz. Higher frequencies, of 6MHz and above, are typically used to treat forehead skin, close to the skull.

In cosmetic medicine, HIFU has been cleared to treat subcutaneous tissues for the purpose of body contouring, also known as non-invasive liposuction.

The use of HIFU is not restricted to medicine; in industrial settings, it is used to break off solids or agglomerations of compounds. In some water treatment plants, for example, HIFU is used to destroy soils and promote the process of osmosis that purifies the water.

Frédéric Pimparel, Technical Application Manager for Morgan Advanced Materials explains, several of Morgan's cutting edge ceramics are particularly suitable for HIFU. “Many of our exclusive, proprietary materials have qualities that are very helpful in HIFU. For example PZT401 offers a good compromise between high permittivity, low dielectric losses, high density, high piezoelectric activity and a high mechanical factor.


Contact Details and Archive...

Print this page | E-mail this page