This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

LH current transducer range pushes Hall effect technology to new limits

10 May 2016

LEM announces the LH family of transducers, a new range that can be mounted on PCBs for non-intrusive, isolated measurements of DC, AC and pulsed currents from 25A to 100A nominal.

The family consists of three new models: LH 25-NP, LH 50-P and LH 100-P.

These new transducers are based on LEM’s latest leading-edge ASIC technology, which has been proven in the recently launched LF xx10 current transducer series. Used in a closed loop mode, the ASIC based on Hall effect technology enables comparable performance to higher-cost technologies such as fluxgate. This new family takes advantage of these benefits at lower currents such as 8, 12, 25, 50 and 100A nominal.

The LH 50-P and LH 100-P are designed for 50 and 100A nominal respectively, while the LH 25-NP is a multi-range model that can be configured for 8, 12 or 25A, providing the equivalent of three transducers in one device.

The new series breaks new ground, delivering up to 3.5 times greater global accuracy over the temperature range than the previous generation of Closed Loop Hall effect current transducers. The global accuracy up to 0.5 percent of IPN is maintained over the entire temperature range from -40°C to +85°C, with a maximum offset drift of 0.1 percent of IPN.

With comparable performance to fluxgate, engineers can achieve better control and increased system efficiency, enabling significant added value to the final application such as more accurate movement of robots or better energy consumption. These benefits can be realised while eliminating the drawbacks of fluxgate such as noise, the problems of start-up with primary current flowing and delays before restarting after an overload.

Operating from a dual supply voltage from +/- 12 to +/- 15V, the LH models can measure peak current up to 2.2 times the primary nominal current while responding quickly to a di/dt step with a response time of less than 0.5µs.

This new range is a fully compatible improved performance upgrade for the previous LEM LAH range, using the same footprint and providing the same functionality. It can therefore be easily retrofitted into old installations, offering a variety of compact sizes for each current range and without compromising the high insulation provided between the primary and measurement circuits.

Industrial applications such as variable speed drives, servo motor drives, uninterruptible and switch-mode power supplies, battery-supply installations, power supplies (particularly for welding systems), air conditioning, home appliances, static converters for DC motor drives, as well as robotics are integrating an increasing number of transducers. This allows engineering to achieve high levels of control and automation that improve the performance and energy efficiency of a wide range of products.

LH series current transducers are CE marked and conform to the EN 50178 standard, as well as being covered by LEM’s five-year warranty.


Contact Details and Archive...

Print this page | E-mail this page