This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Cut your bottom line costs with ISO 11011

06 June 2016

BCAS is urging businesses to adopt ISO 11011 to cut the cost of running their compressed air systems, even if they don’t have to comply with ESOS (Energy Saving Opportunities Scheme).

Says Vanda Jones, Executive Director of BCAS said “most businesses have no idea what the annual running costs of their compressed air systems are, yet it could be costing them up to 25 percent of their annual electricity bill. In today’s competitive world with increasing pressure on margins, any activity that can reduce the bottom line has to be worth exploring.”

Before ESOS there was no process specific standard for assessing compressed air systems. Working with its members BCAS helped produce and publish BS ISO 11011, which was then adopted as the international standard ISO 11011.

Continues Jones; “before ESOS, assessments of compressed air systems were either not done at all or relied on non standardised procedures and tests. Unfortunately some of these were unsuitable, inaccurate, too expensive and ultimately non productive. This has now changed with ISO 11011.”

The standard identifies the roles and responsibilities of those involved in the assessment and considers compressed air systems as three functional subsystems; supply, transmission and demand.

It provides a structured framework for data analysis, reporting and documenting any findings. The assessment then identifies estimated energy savings and a targeted action plan.

Concludes Jones; “it is always worth doing an energy audit on your compressed air system, which will often yield significant cost savings. Check with your service and maintenance supplier that they apply ISO 11011 to such an audit.”

BCAS offers a day’s introduction to ISO 11011 at a location of your choice.  Alternatively several BCAS members offer a third party assessment service to meet the requirements of ISO 11011. For details of the day’s introduction and BCAS members visit www.bcas.org.uk


Contact Details and Archive...

Print this page | E-mail this page