This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Pre-assembled plug for easier handling and installation

20 July 2016

A pre-assembled plug was among the new products to be exhibited by Lee Products at the recent Farnborough International Air Show.

The Lee Plug is simply the most effective and field-proven method of ensuring a permanent leak-proof seal to drilled holes in critical applications including, aviation, machine tools, down-hole tools, moulds, or any application requiring a permanent seal. 

The operating principle is based on a cylindrical plug with a tapered hole part-way through its centre and small grooves on its outside diameter. It is slipped into a reamed counter-bore in the product and then a tapered pin is driven into the plug until the ends of the pin and the plug are flush with each other. Controlled expansion causes the lands and grooves of the plug to ‘bite’ into the surrounding material forming independent seals and retaining rings. The result is a positive, reliable and permanent, leak-proof seal for both liquids and gases which as a simple and proven principle, contributes to significant improvements in the design and manufacture of all fluid devices.  

Lee’s pre-assembled plugs are available in four sizes of .093, .125, .156 and .187” diameter, are designed for high proof pressures up to 12,000 psi and are compliant with RoHS, REACH, WEEE and ELV requirements. Assembly time for the pre-installed plugs is approximately 25 percent less than for the standard short aluminium Lee Plugs.

Contact Details and Archive...

Print this page | E-mail this page