Hypoid gear technology from alpha gearheads
30 November 2007
alpha gearheads' right-angle gearheads use the very latest hypoid gear technology, offering three clear advantages over bevel gearings: they facilitate increased torque because the pinion is larger; generate cost savings, thanks to higher reduction ratios in a single stage, and produce considerably less noise owing to the smaller radius of curvature of the tooth mesh as well as a larger spiral angle.
Traditionally, customers have been forced to choose between high-speed coaxial drives and slow-speed right-angle drives; in other words, speed and compactness were mutually exclusive. The High-Speed Right-Angled Gearheads put an end to this long-accepted compromise.
Hypoid SK+ and SPK+
With up to 100% more torque and speed than comparable products, the SK+/SPK+ series right-angled gearheads offer ratios of 3:1 to 100:1 (SK+) and 12:1 to 100:1 (SPK+) and up to 400Nm nominal output torque for the SK+ and 750Nm nominal output torque for the SPK+.
Hypoid HG+ Hollow Shaft Gearhead
alpha's HG+ innovation offers several advantages. It offers more power from less space and opens up completely new applications with its hollow shaft on both sides. With up to 200% more torque and 100% higher speeds than comparable products, the HG+ also offers a long lifespan with low torsional backlash and high rigidity even in highly dynamic operations of up to 50.000 cycles per hour.
Hypoid TK+ and TPK+
The TK+ gearhead is the low backlash hollow-shaft robot flange gearhead and the TPK+ is the low-backlash right angled gearhead with robot flange. The low torsional backlash and high torsional stiffness assure the positioning accuracy of your drives and machines, even in highly dynamic operations.
Contact Details and Archive...