This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Smaller, faster, easier pumping with Viking Motor Speed

22 September 2016

A new and innovative internal gear pump which can be driven by standard electric motors, without the need for a gearbox, is the latest addition to the range of Viking pumps from Michael Smith Engineers.

The Viking Motor Speed pump is designed to run at higher speeds and deliver increased flows resulting in a more cost-effective pumping solution requiring less space and at reduced cost.

The name Motor Speed emphasises the ability of these pumps to be driven by standard electric motors at either 720, 960 or 1450rpm, without the need for a reduction gearbox. Whilst the term ‘motor speed’ is a generalisation and depends on the actual duty, for many applications it will enable smaller pumps to be run faster providing higher flows. The range includes models which provide flows up to 88m³/h at standard motor speeds, or 132m³/h with speed reducers or gearboxes.

Viking has experience in positive displacement pumping and application expertise and this, combined with advances in the science of flow, has contributed to the innovative design of the Motor Speed pump head. For example, the pump head now incorporates idler and rotor speed grooves to improve axial feed, a liquid directing step to reduce turbulence, a modified crescent to boost radial feed and improved port geometry to optimise flow paths. 

The pump rotor’s profile has also been increased and, on larger models, the standard idler material is hardened steel case hardened to 39 Rockwell C to reduce the effects of cavitation. The result of all these design improvements is that the pumps can be operated at higher speeds than before so you get a greater flow from a smaller pump than previously. Other features of the new Motor Speed Series include a pressure lubricated idler pin and bushing to enhance the pin and bushing life, sealed, anti-friction bearings eliminating the need for re-lubrication, a behind the rotor seal which means the drive shaft and bearings are not exposed to the pumped media and a threaded one-piece bearing housing which allows for easy end clearance adjustment.

Viking Motor Speed pumps are available in a close-coupled and long-coupled drive options for motor speed operation and with gearboxes, or speed reducers for reduced speed operation. 

In common with the general characteristics of Viking Internal Gear pumps, the new Motor Speed pumps are designed to meet the demands of heavy-duty, industrial pumping applications, even in the most challenging environments. Typical applications will be transferring refined fuels such as diesel and biofuels, also crude oil, edible oils, lubrication and hydraulic oils as well as chemicals including solvents, glycols and refrigerants.


Contact Details and Archive...

Print this page | E-mail this page