This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Heat sink enclosure

01 December 2007

Astrosyn is currently offering the Lawtronics HSK range of extruded aluminium, interlocking heat sink enclosures, which comprises two sliding channels together with end panels. The arrangement enables the electronics to be worked on in situ when the top half of the casing is slid open. The free-standing or 3U rack mount models provide a rugged, low thermal impedance housing for sensitive electronics, standard units being large enough to house a toroidal transformer of up to 100VA.

Eurocard boards are accommodated by internal card guides, enabling power devices to be attached to the heat sink section of the vertical wall with an M3 screw and half nut, with no need for drilling. Two boards can be mounted within the black anodised enclosure, and standard spacers can be used to support heavy components.

Available in 160mm or 220mm lengths, they have a normal wall thickness of 2mm, increasing to 7mm adjacent to power devices. Internal and external M4 nut 'T' slots also provide special mounting facilities.


Contact Details and Archive...

Print this page | E-mail this page

Phoenix Contact