This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

High end graphics capability and frugal power requirements

19 October 2016

The new LP-176 Pico-ITX (100 x 72mm) form factor board is based on a 14nm Braswell four core processor, either the N3710 Pentium Core clocked at 1.60GHz or the Atom X5-E8000 running at 1.04GHZ.

Both versions have Generation 8 graphics support with a standard HDMI output; a DisplayPort interface is an optional alternative and HD audio is from the Realtek ALC262 Codec. A 24-bit dual channel LVDS graphics interface is also on-board. Up to 8GB of 1600MHz memory is available. With a very low TDP of 6W for the Core and 5W for the Atom processor, both are suitable for fanless operation in a wide range of space constricted applications such as information appliances where graphics rich performance and high end audio is a key requirement.

Mass storage is accessed through a 6Gb/s SATA3 interface; a Mini PCIe slot also supports mSATA. Other I/O includes a Gigabit LAN port, USB2.0 and 3.0 ports and a RS232 serial port. Power is from an external 5.0VDC ± 5% supply. 


Contact Details and Archive...

Print this page | E-mail this page