This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

3D printed 'eagle eye' camera mimics sharp vision of predators

16 February 2017

A new study presents a miniaturised camera inspired by the natural vision of predators such as eagles that captures images with a high central acuity.

GIF showing the miniaturised camera system, including the image sensor with 3-D printed lenses. (Credit: Simon Thiele/ Carla Schaffer/ AAAS)

The camera demonstrates for the first time direct, three-dimensional printing of a complex imaging system onto a chip to form a multi-aperture camera.

The design has potential applications in areas such as endoscopy, optical sensors, and surveillance drones, and it builds upon the growing field of micro-optics that has been revolutionised by advances in 3D printing. The system presented here involves so-called "foveated imaging," named after the fovea area of the eye, which gives the highest acuity in vision.

It is based on the idea that since many tasks do not require equal clarity across a field of view, only the central view needs to be the most detailed. Simon Thiele et al.'s camera has four printed lenses, each with different focal lengths ranging from a narrow (20°) to a wide (70°) field of view. Overlaying the images rendered by each lens leads to a "foveated image" with a high resolution in the centre.

Evaluation of the device demonstrated a significant improvement in the sharpness of the centre of the test image between the proposed multi-lens design and a comparable single-lens configuration. Future modifications could incorporate an anti-reflective coating or find ways to reduce the fabrication time to improve commercial production.

The design could potentially outperform a conventional camera of similar size in a small microdrone, or the movable vision sensor on a robotic arm, the authors say.

Materials courtesy of ScienceDaily.

Print this page | E-mail this page

Coda Systems