This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Push-pull chains give Maypole a lift

07 March 2017

Maypole Engineering’s previous successful experiences of using push-pull chain actuation devices supplied by R.A. Rodriguez (U.K.) Limited, led the company to specify the use of Grob LinearChain technology on bespoke automated handling systems required by a leading hydraulic motor manufacturer based in the UK.

Maypole Engineering application

The project demanded the design and manufacture of three special workstations centred around a conveyor to automate the lifting and rotating of hydraulic motors ready for assembly operations. The motors are used for applications that range from boat winches to drill heads for tunnelling. 

Chris Hudson, Technical Sales Engineer at Wokingham-based Maypole Engineering, explained that in total, the automated handling stations needed to accommodate over 20 motor variants of different sizes, some of which are double-stacked to provide more torque. The first two stations, known as T1 and T2, are completely automatic – no operators are required. These clamp, lift, turn and orientate the motors in line with specific build instructions before placing them on to pallets ready for assembly operations at T3, which has a light guard system to protect the operator.

Each station features the same manipulation concept. Here, a Grob LinearChain SK12, with a stroke length of 1200mm and load capacity of 1250kg, is used to provide vertical motion. The chain, which is connected to a gear-motor via a Grob transmission (again supplied by R.A. Rodriguez), coils inside the magazine when retracted, making it particularly suited to applications calling for long strokes where space is at a premium.

Grob LinearChain features a special profile with interlocking fingers that allows it to become a rigid thrust device for pushing a guided load, such as on a linear slide or a rail. The great benefit of using a push-pull chain to move a load is that it can be stored compactly. 

R.A. Rodriguez can supply Grob LinearChain stroke lengths up to 30m with a maximum push force of up to 35,000kN. The device provides high positioning accuracy, constant stroke speed and shock-free motion with no elastic hysteresis under load.  

Mr Hudson noted that the project was completed around six months ago. Each station can perform vertical, horizontal and rotary manipulation of the customer’s hydraulic motors, while the production cycle time to complete the operations is just nine minutes. From the company’s perspective, using the Grob LinearChain offers simple and quick installation, and it’s very cost effective in comparison with a hydraulic or electric actuator. Furthermore, LinearChain needs minimal head room and is easy to maintain. Maypole have used it before on a number of high profile projects.

Maypole Engineering is also happy with the service provided by R.A. Rodriguez, which has proven to be far more than simply a supplier.

Mr Hudson concludes that for each project, the design engineers calculate the required weight that the chain will have to push and pull, before R.A. Rodriguez works out the specification of the most suitable Grob LinearChain in terms of capacity and length. 

Contact Details and Archive...

Print this page | E-mail this page