This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Reliability testing for the Solar Orbiter instrumentation

07 April 2017

National Instruments (NI) provided key hardware for on-board the Solar Orbiter, which is a European Space Agency (ESA) spacecraft that will find out more about our nearest star.

Artist impression of Solar Orbiter device, launching in 2018 (Credit: ESA)

NI’s CompactDAQ hardware performed thorough and extensive testing of the scan-focus mechanism on the SPICE instrument on-board Solar Orbiter, and LabVIEW software was used to develop an automated test framework called Metest to aid in creating a software solution.

Solar Orbiter - next generation Sun explorer

Solar Orbiter will launch from Earth to hurtle hundreds of millions of kilometres through space to examine how the Sun creates the heliosphere, the vast bubble of charged particles blown by the solar wind into the interstellar medium. Ten science instruments on-board the spacecraft will perform a range of measurements and imaging of the Sun to gain new information about the solar wind, the heliospheric magnetic field, energetic particles, transient interplanetary disturbances, the Sun’s magnetic field, and its dynamic atmosphere. 

Scheduled for launch in October 2018, the mission will provide high-latitude observations of the Sun from 40 million kilometres, inside the orbit of the closest planet Mercury and closer than any man-made object in history.

Space mechanism manufacturer ESR Technology is testing the Spectral Imaging of the Coronal Environment (SPICE) instrument, which performs extreme ultraviolet imaging spectroscopy to remotely characterise plasma properties of the Sun’s on-disk corona. This may teach us more about the causes of solar flares, the structure of the heliosphere, solar wind, and how the Sun creates its magnetic field.

Test system

Space is one of the harshest environments for technology to function in. Temperatures can vary wildly. Cosmic radiation can cause problems in circuitry. Lubricants that work well on Earth can be entirely ineffective in the vacuum of space. The key to a successful space exploration mission is reliable and proven components and instruments.

NI products were chosen because CompactDAQ hardware and LabVIEW software could provide a complete automated test, control, and data-logging solution for a rigorous series of validation tests spanning nine months. The versatility of NI products would cover a diverse range of uses because the variety of C Series modules can cope with many different signal types. As requirements and projects evolve, ESR Technology may also look to modify the system or the test process, which makes the flexibility of the NI platform a real advantage. 

Metis Automation’s solution to the problem relies on this flexibility to acquire signals from multiple devices simultaneously. It presents the test operator with a simple interface that requires no knowledge of the instrumentation detail behind the scenes, making it quicker and easier to run the tests.

Test automation

Tests of SPICE require a combination of manual interaction and automated control. The solution Metis developed allows the creation of automated test scripts so one engineer can run a test unattended and only return occasionally. This is a massive improvement over manual testing that previously would have required a test operator to attend to the test rig full time and make frequent manual adjustments to the system. Another key benefit of the automated test system was the repeatability of tests. Once an automated test script is created, it can be re-run. ESR Technology can now easily repeat complex tests that give unexpected results to help identify any issues with the unit under test or determine whether environmental factors affected the result, which is extremely beneficial.

Flexible data logging

Overview of the test system

ESR Technology needed high-speed data logging for high-resolution data of important events, but constant high-speed logging leaves you with the challenge of unmanageable volumes of data over long test periods. The Metis software solution includes the option to automatically schedule or trigger data logging at fast rates, meaning the operator can configure a test in advance and schedule when high-speed logging should occur. Only the relevant data is acquired at high rates, which saves terabytes of disk space and simplifies data analysis. 

A flexible, maintainable system

CompactDAQ modules have many types of signal conditioning built in, so ESR Technology can directly wire all its sensors into its modules to simplify the wiring. It can also adapt the test hardware for new signals by simply changing C Series signal conditioning modules, which makes this test system flexible and extensible for future tests. The NI-DAQmx driver set even lets users acquire from multiple different signal types within the same measurement task, making software development easy. 

High speed, synchronised data acquisition

ESR Technology needed to combine measurements from some generic analogue sensors with Micro Epsilon capacitive sensors, which have very high resolution and micron-accuracy distance measurements. All sensor readings had to be synchronised to be useful. 

Micro Epsilon provides LabVIEW drivers for reading values through an Ethernet connection at high rates. Metis Automation has several experienced Certified LabVIEW Developers and Certified LabVIEW Architects. A little known, but immensely useful, LabVIEW feature was used - the ability to synchronise the start of timed loops - to deliver code that can synchronise measurements across sensors from different vendors. The code can acquire synchronised data from the CompactDAQ and the Micro Epsilon sensors with the flexibility to handle errors for each device, whilst remaining modular.

Before using this feature, engineers reported data samples that were out of sync by hundreds of milliseconds, adding significant post-processing effort. With the Metis solution, samples were synchronised to within a single millisecond.

Simplifying code with LabVIEW object-oriented techniques

The LabVIEW software was developed using object-oriented techniques. Object-oriented programming (OOP) simplifies hardware dependencies and test steps for more flexible software development that can accommodate changes to the test requirements without affecting code already written. Using OOP saved a lot of time during the extensive test and debugging phase of the project.


Developing hardware for space relies on the ability to verify demanding performance characteristics under a variety of environmental extremes. ESR Technology and Metis Automation have developed a flexible and reliable testing solution using LabVIEW and CompactDAQ. The NI platform and the expertise provided by Metis Automation has proven the reliability of the SPICE instrument, ensuring it can deliver ground-breaking insight into the physics of the Sun. The modularity and scalability of the system will allow extension of this architecture into future test rigs.

Contact Details and Archive...

Print this page | E-mail this page