This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Extended range of subrack front panels and modules

24 April 2017

The KM6 subrack family from Verotec is one of the most versatile systems available on the market.

Three different systems, each optimised to suit a range of applications, are available: KM6-II, KM6-RF and KM6-HD. Front panels, compatible with all KM6 versions, are a critical building block; three types are available: unshielded to IEC 60297, shielded to IEEE 1101.10 and a further design dedicated to the VXI architecture. Two and four rail modules, which can be fitted with top, bottom and side covers to enclose, screen and protect the PCB are available in 3U and 6U heights, 160 and 220mm depths and a range of widths from 10 to 42HP.

Iridite NCP conductive finish extruded shielded panels are fitted with a double swipe stainless steel EMC gasket. They are available as blank filler panels, with a fixed pull handle or with an improved design of injector/ejector latching handle that generates greater insertion and extraction force for use with high pin count backplane connectors. The injector/ejector handles include a pre-location pin and an ESD protection pin; a live extraction micro switch and additional screw fixings are optional extras. Shielded panels are available in 3U, 6U and 9U heights and 4, 5, 6, 8, 10 and 12HP widths as standard, other widths to order.

Unshielded versions are available as blank panels or with pull handles in 3U and 6U heights and widths from 2HP to 84HP. Both types are available either with both faces anodised and plastic screw mounting bushes or, where electrical conductivity with the subrack frame is required, with an anodised front face, an iridite NCP rear face and metal fixing bushes. Hinged versions in popular widths are also standard. 

For VXI systems, Single and double with C and D size modules are available; shielded panels in a heavy duty extrusion that accepts beryllium copper shielding fingers are also available in 6U and 9U heights and 6HP and 12HP widths.

In-house customisation capability for all versions includes legend printing, drilling and milling holes, cut-outs, slots and recesses to accept front panel furniture such switches, connectors, displays and indicators.


Contact Details and Archive...

Print this page | E-mail this page