This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

ESA and MTC have lift off with 3D printing benchmarking centre

30 May 2017

The European Space Agency (ESA) is embracing 3D printing with a new UK-based ‘one-stop shop’ in partnership with the Manufacturing Technology Centre (MTC).

The UK National Centre for Additive Manufacturing based at the MTC in Coventry

The MTC, based in Coventry and home to the UK National Centre for Additive Manufacturing, will manage the new ESA Additive Manufacturing Benchmarking Centre (AMBC), which will provide a simple and easy way for ESA projects and hi-tech companies to investigate the potential of additive manufacturing for their work.

The move will see the ESA call on the expertise of the MTC, which is at the forefront of additive manufacturing (AM) and offers access to the latest state-of-the-art AM capabilities, allowing prototype parts to be produced and then assessed in terms of their suitability for specific applications.

“The ESA’s Directorate of Technology, Engineering and Quality has called for the creation of a detailed roadmap for the harnessing of 3D printing to the space sector,” says Torben Henriksen, Head of ESA’s Mechanical Department.

“We’ve been guided to set up this Centre, with customers and industrial partners questioning us about the best way to try out 3D printing for the first time and test out the maturity of the results.”

Tommaso Ghidini, head of the ESA’s Materials and Processes Section, added: “Having identified this requirement, we have outsourced its operation to the MTC.

“We don’t want to compete with industry; instead the idea is that ESA projects and interested companies can investigate this new engineering world to the point where they will take a decision to proceed further.”

Dr Dave Brackett, technology manager for additive manufacturing at the MTC, believes ESA’s exploration of the use of AM will be incredibly beneficial for the technology.

“This is a brilliant opportunity to further the advancement of the technology in one of the most testing and dynamic application areas.

“As the UK National Centre for Additive Manufacturing, we are in a unique position to work with ESA as their Additive Manufacturing Benchmarking Centre and provide the space sector with access to state-of-the-art capability and understanding to support industrial exploitation.”

Europe’s Vega small launcher will be the first project to make early use of the Centre.

“By evolving Vega over time, we aim to hone its competitiveness, increase its flexibility and reduce recurring costs,” said Giorgio Tumino, who is overseeing its development programme for ESA.

“We’re co-operating with the AMBC to investigate the use of 3D printing for rocket engine thrust chambers for Vega’s upper stage, potentially allowing for a significant simplification in production and reduced costs.

“For such high pressure/high efficiency liquid rocket thrust chambers, a good surface finish is essential, with the absence of critical defects and the equivalent strength properties of its parent material – produced to a size at the limit of the current capabilities for powder-based additive manufacturing machines, using non-standard alloys.

“The AMBC will demonstrate the capability to use 3D printing on copper-based thrust chambers and set the proper process parameters, producing a one-third scale thrust chamber that can then be used for firing tests. If all goes well, then the next step would be to scale it up to full scale, and start the formal qualification of the process for flight use.”

The UK National Centre for Additive Manufacturing facility maintains a comprehensive portfolio of materials, machines and post-processing options, which will enable the AMBC to print a variety of test hardware, using polymers, metal and ceramic 3D printers.

Follow-up testing, including detailed failure investigations, will supply customers with a fuller understanding of the strengths and weaknesses of their chosen 3D printing method, along with advice on future improvements.

All test results generated by the AMBC will be published in a Europe-wide newsletter, to spread its know-how as widely as possible, and consolidate European leadership in 3D printing.

The AMBC on the MTC campus is about an hour away from the ESA–RAL Advanced Manufacturing Laboratory at ESA’s Harwell facility, which is focused on enhanced scientific understanding of 3D printing and other advanced manufacturing techniques.


Print this page | E-mail this page