This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Enhancing performance and safety of medical implantable devices with multiphysics simulation

18 December 2017

At St. Jude Medical, ventricle assist devices are developed to improve the lives of patients with heart failure. Numerical simulation is used throughout the design process to characterise diverse concurrent aspects of the design, from thermal effects and fluid dynamics to power transfer.

An LVAD pump is responsible for circulating oxygen-rich blood throughout the body. (Image courtesy of St. Jude Medical)

Researchers at St. Jude Medical use multiphysics simulation to engineer LVADs, Left Ventricular Assist Devices, in an ongoing effort to improve the outlook and quality of life of patients with heart failure.

Designing a powerful, efficient, and hemocompatible pump 

The design of an LVAD must take many factors into consideration. The device must be small enough to connect to the heart and be made of compatible materials and geometry that permit the device to reside in the body without being rejected. Fluid dynamics, power supply, and thermal management must also be considered. As multiple interacting physical effects must be accounted for at each area of development, multiphysics simulation is vital to the design process.

Freddy Hansen, Sr. R&D Engineer at St. Jude Medical, uses his expertise in physics and mathematical modeling to characterise complex implantable medical devices like LVADs before experimental studies.

Hansen has been using COMSOL Multiphysics software since 2011, and has since created upwards of 230 models that address a wide range of design challenges pertaining to the unique physics of artificial pumping devices.

With each generation of LVADs introduced to market, improvements are made that contribute to enhanced safety and quality of life for the patient. Geometry and size of the device play an important role in its overall effectiveness. Simulation allows for the evaluation of changes in size or geometry of the LVAD design before implementation in a physical prototype.

Optimising LVAD design for biocompatibility

Many simulations were used in the development of the centrifugal pump of the LVAD. One challenge associated with engineering these devices is the prevention of blood clotting in any space in or around the pump. To address this, a magnetically levitated rotor was developed, which eliminated the need for ball bearings and other components with geometries that might promote clotting. Hansen used the Rotating Machinery modeling technology available in the software to model both the magnetically levitated rotor and turbulent fluid flow. 

External Equipment of an LVAD. (Image courtesy of St. Jude Medical.)

A permanent magnet in the pump rotor is driven by coils in the stator, which exert a torque on the rotor and provide active control of the position of the rotor axis. The vertical position – or levitation – of the rotor is accomplished by magnetic field line tension and does not need active control. The rotor receives blood axially and redirects it radially, into the volute, or fluid collector. Some of the blood flows back and around the outer edge of the rotor and flows back into the rotor inlet, resulting in a constant washing of the blood, which serves to eliminate places where the blood can stagnate and clot. 

Another significant advance was the development of a pump system with pulsatile flow, rather than continuous flow, which more closely mimics a functioning heart. The pulsatile flow aids in the washing of the blood, preventing blood clots, and is also believed to have a positive physiological effect on blood vessels throughout the body. 

Wirelessly powering a fully-implantable LVAD

Current LVADs require power transfer from external batteries in a controller outside the body to the pump by way of a cable for example, made with materials engineered to be biocompatible. But what if the cable could be eliminated?

Hansen explored transferring power by way of magnetic resonance coupling. Magnetic resonance coupling occurs when two objects having almost the same resonance frequency, transfer energy to each other through their oscillating magnetic fields. In this way, power can be transferred from a power source to another device, even through a biological medium such as tissue.

A Fully Implantable LVAD System (FILVAS) would decrease infection risk and improve patient quality of life, as the patient would not need to be concerned with cable management. With this concept the patient could shower or swim without concern for the cable. 

To assess the feasibility of wireless power transfer to an LVAD and determine how much power could be delivered between reasonably sized coils, Hansen coupled a 3D magnetic field model with an electrical circuit model to determine operating efficiency and power loss, as well as optimal circuit design and component values. 

‘Fully implantable LVAD system’ early concept. Magnetic field and heat transfer model showing power density [W/m3].

He evaluated different materials for important components, such as the wires of the transformer coils. He also studied the misalignment of a coil due to patient walking, running and other activities, and together with the effect of the presence of nearby magnetic or metallic objects. 

Engineers also had to ensure that body temperature and biological systems will not be affected by the implant. The wireless transfer of energy induces small currents in the body tissue near the coils. Hansen modeled the heat generated in the tissue as a result of the induced currents, combined this with models of heat generated inside the implant (in magnetic wires, electronics, and batteries), and then used the thermal conductivity coefficient determined from a famous Cleveland Clinic experiment, to determine the temperature increase in body tissue near the implant.

Protecting life-sustaining batteries

Patients must live with their LVADs every single day, which inevitably means that the external LVAD controller must be able to withstand the wear and tear of life, as well as the occasional dropping of the controller to the floor. To ensure that the controller (which contains crucial life-saving batteries) will continue to function even if the patient tosses it around, Hansen developed a mechanical impact analysis of the controller in order to assess its resilience. 

He also analysed the edges and surfaces of the deformed structural shell and the frame for twisting, to verify the integrity of the controller. The analysis proved that the controller would continue to provide life-sustaining power to the LVAD even after a substantial impact.

New technology shows improved options for patients in the future

In designing devices to assist and replace the function of the heart, multiphysics analysis has proven to be essential. Hansen combines experimental characterisation and mathematical modeling to understand the physics of ventricle assist devices, and improve the biocompatibility of the device as well as the overall patient experience.

Contact Details and Archive...

Print this page | E-mail this page