This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Did you see Mitsubishi Electric in the Robot Zone?

16 April 2018

In the Robotic Demonstration area of Drives & Controls 2018 Mitsubishi Electric showcased its latest developments in robotics and motion engineering.

Two highlights were an automated guided vehicle (AGV) with a robotic arm mounted onto it, developed together with AGV manufacturer Mirage, and the new MELFA collaborative robot.

The typical factory of the future will likely include more highly advanced robots working alongside people, providing cooperative support on certain tasks or performing activities side by side, and running without the need for physical safeguards. At Drives & Controls 2018, Mitsubishi Electric showed how its new collaborative robot and an AGV equipped with a robotic arm can respectively cooperate with humans in industrial plants, and work around them, boosting productivity and enhancing plant flexibility.

The next level of interaction

Mitsubishi Electric defines robot safety and human proximity in four levels, from level 1 where standard industrial robots operate with physical safety guards, through to fully collaborative level 4 robots. Full-time collaborative operation between human and robot requires a different type of robot from the previous three levels, all of which are based on standard industrial robot models. There was a working demonstration of Mitsubishi Electric’s brand-new level 4 collaborative robot at the show this year. 

Working with a collaborative robot can be highly productive in complex assembly tasks where the limitations of human dexterity or a conventional jig mean a robot can manipulate a work piece or part more effectively while a person is able to use both hands for a related task. Due to the constant proximity both speed and torque for the robot are automatically limited. The robot can be stopped by-hand, but also taught what to do next by using a removable touch-screen operator terminal or a ‘direct control’ mode which allows the operator to move the robot from position to position, by hand and with controlled force. 

Robots on the move

Visitors to the Robotic Demonstration area experienced an innovative mobile unit that combines a robotic arm mounted onto an AGV. The vehicle was developed by Mitsubishi Electric with AGV manufacturer Mirage and combines Mitsubishi Electric’s MELFA SafePlus zoned speed control feature with the standard AGV movement protocols. The result is a robot that can deploy itself to be used for checking, packing and loading duties in several different areas of a factory floor depending on various production cycles and batch processes.

The robot safety zone system limits the position, torque and speed of the robot in stages as a human gets closer, so a cell using this configuration can be very small and compact. The robot goes from high-speed to slow-speed and back again quickly, allowing both the robot and the human to work quickly and efficiently without stops. In contrast with other line integration systems, the innovative solution doesn’t need to stop to perform actions at a defined station, but it can orient itself and can even complete tasks between the AGV base and the station while moving. The result is a flexible solution that can potentially improve productivity and increase robot deployment options.


Contact Details and Archive...

Print this page | E-mail this page

Coda Systems