This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Robot submarine has no need for an engine!

07 June 2018

Using nothing but 3D printing, scientists have developed a paddling submarine that requires no engine, propellant or power supply.

Visualisation of a simple mini-submarine with two paddles. (Credit: ETH Zurich/Tim Chen)

This new propulsion concept would be ideal for swimming robots. As a proof-of-concept study, the researchers developed a 7.5cm (a bit less than three inches) mini-submarine equipped with paddles, which they fabricated entirely using a multi-material 3D printer. A paper describing the work appears in the journal PNAS.

The paddles work using a bistable propulsion element, which two shape memory polymer strips activate. Kristina Shea of ETH Zurich and doctoral student Tim Chen developed the shape memory polymer strips.

Designed to expand in warm water, the polymer strips power the robot by acting like “muscles.” If the water in which the mini-submarine floats is heated, the expansion of the “muscles” causes the bistable element to quickly snap, triggering a paddle stroke. The directional motion, force, and timing of the paddle strokes are precisely defined by the robot’s geometry and material.

At present, each actuating element can execute a single paddle stroke before researchers must then reprogram it manually. However, as the scientists point out, it’s possible to fabricate complex swimming robots with multiple actuators.

The scientists have already made a mini-submarine that can paddle forward with one stroke, release its “cargo” (a coin), and then navigate back to the starting point with a second paddle stroke in the opposite direction, all by sensing changes in temperature of the water.

Varying the geometry of the polymer muscles allowed the scientists to define the sequence of paddle strokes. Thin polymer strips heat up faster in warm water and therefore respond faster than thicker ones.

“The main takeaway from our work is that we have developed a new and promising means of propulsion that is fully 3D printed, tuneable, and works without an external power source,” says Shea.

Researchers hope to develop the submarine’s propulsion system further to create a low-power vessel for exploring ocean depths.

Researchers from the California Institute of Technology also contributed to the work.

Source: ETH Zurich

The original article can be found on Futurity

Print this page | E-mail this page

Coda Systems