This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Call and reset relays for remote alarm systems

25 June 2008

Finder has introduced the 13.12 call and reset relay, which activates an alarm at a remote point to provide local indication of activation. The relay will be of particular interest to designers and installers of attendant call systems in hospitals and care homes, and to contractors involved in the provision of facilities into residential and commercial buildings where occupants may need to call for assistance.

The 13.12 features dual outputs, offering the facility for both a remote alarm signal and a local indication of activation to be activated simultaneously. Independent set and reset inputs provide flexibility in thelocation of activation and acknowledgement points. The relay output contacts are rated at 8A, which means that they are capable of directly switching incandescent lamp loads up to 800W. Set and reset inputs are both
continuously rated, so that no damage is caused to the product if it is inadvertently left permanently activated. The relays are suitable for 35mm rail or panel mounting if an additional bracket is used. The length of the cable run between the set/reset points and the unit can be up to 100m, allowing multiple units to be placed in a convenient centrally locatedcontrol panel for ease of maintenance and space saving.

The 13.12 relays are housed in a compact 17.5mm single unit width rail mounting enclosure.


Contact Details and Archive...

Print this page | E-mail this page

Igus - Tech Up, Costs Down