This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Infrared temperature sensor now with I/O-Link and setting aid

19 July 2019

Both the analogue measured value and the switching output are freely programmable via I/O-Link or directly on the new infrared temperature sensor.

The sensitivity is also easy to set remotely or directly on the sensor. In addition, ifm electronic has equipped the new TW21 series devices with a pilot light as a setting aid for precise orientation. 

Non-contact temperature measurement: The new device shows its strength above all with exact temperature measurement of particularly hot objects or objects that are difficult to access, such as in the steel, plastics or glass industries. The green pilot light is easily visible even on red-hot surfaces. The sensor also features a simulation mode that can be directly triggered on the sensor or via an external control signal.

Batch-related programming: Parameters can be dynamically adjusted to the application from the control room using the integrated I/O-Link communication interface. Local parameter setting on the unit is not necessary but can be done via the buttons and display. The new infrared temperature sensor from ifm is available in different variants for different temperature ranges. 

https://www.ifm.com/gb/en/shared/product-news/2017/sps/infrared-temperature-sensor-with-io-link-and-led-pilot-light


Contact Details and Archive...

Print this page | E-mail this page