This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Uncrewed gyrocopter drone for safe and cost-effective freight transport

30 July 2019

The German Aerospace Centre (DLR) is conducting research into automated, uncrewed air transport at low altitudes.

Un-crewed cargo drone (Credit: DLR)

In a globalised world, logistics and networking are becoming increasingly important. Airborne parcel deliveries are a key area of interest for the future and have considerable potential in a number of applications. 

As part of the ALAADy (Automated Low Altitude Air Delivery) system and ALAADy Demonstrator projects, the German Aerospace Centre (DLR) is conducting research into automated, uncrewed air transport at low altitudes. As part of this research, transport of larger cargo items with a gyrocopter drone is being investigated. In the future, this will allow flexible, safe and cost-effective transport of important cargo such as humanitarian aid or urgently needed spare parts to the desired location. In July 2019, DLR conducted successful test flights with the uncrewed freight gyrocopter at Cochstedt Airport.

"As part of DLR's aeronautics research programme, we are developing and testing a demonstrator for uncrewed freight transport, thereby opening up the prospect of carrying loads of up to 200kg for distances of up to 310 miles in lower-level airspace," says Rolf Henke, Member of the DLR Executive Board responsible for Aeronautics Research. “Below normal air traffic, the concept allows for flexible operations on regional routes, away from populated areas."

Swapping seats for a freight-carrying area

The uncrewed civilian aerial vehicle developed by DLR researchers working on the ALAADy Demonstrator project is one of the largest currently available. During the development of the 'transport drone', a 450kg gyrocopter underwent extensive modifications, including the installation of a freight-carrying area. The aircraft has been retrofitted with sensors, actuators and a flight control computer, as well as other software and hardware for automated flight. "This technology demonstrator is ideally suited to validating the concepts developed at DLR for low-flying air transport with significantly higher payloads than those systems previously investigated," says ALAADy Project Leader Johann Dauer from the DLR Institute of Flight Systems in Braunschweig.

During the current flight tests at the National Experimental Test Centre for Unmanned Aircraft Systems in Cochstedt, the team of developers initially controlled the uncrewed gyrocopter manually via a radio link, as is common practice with model aircraft. This allowed all the safety measures and system components to be tested in actual flight, as well as proving the airworthiness of the newly developed transport drone.

"Gyrocopters have the particular advantage of being inherently safe," says Sven Lorenz, who is leading the construction and trial operation of the technology demonstrator at the DLR Institute of Flight Systems. He went on to emphasise the benefits of the configuration: "This means that in the event of a failure, the free-spinning rotor enables a gentle landing, as occurs with a parachute."

Several test flights have now been completed, in which the freight drone reached an altitude of up to 150 metres and travelled at speeds of approximately 62mph. “The test flights have already shown that gyrocopters are a suitable configuration for un-crewed air transport," explains Lorenz. The manual flights are the initial phase of a development process that will incrementally automate the aircraft. Computers are gradually taking over all of the tasks that would otherwise have to be performed by a person within the aircraft or on the ground. “The next step is for the uncrewed gyrocopter to make its first automated flight," says Lorenz. "We are currently developing automatic flight control functions for all phases of flight: taxiing, take-off, cruise and landing.”

Gyrocopter test platform (Credit: DLR)

The findings from the project and the flight test are important building blocks for operating uncrewed aircraft of this size cost-effectively and safely, outside the existing restricted areas. “Integration into a logistics chain, operational risk assessments, automatic monitoring of system status with a safety monitor and the development of risk reduction strategies are further goals of DLR research in the fields of uncrewed, low-level air transport,” explains Johann Dauer.

The ALAADy Demonstrator and ALAADy projects

The DLR ALAADy demonstrator project focuses on the construction and testing of an uncrewed, automated flight test vehicle based on a gyrocopter. A particular challenge in the modification of the software and hardware for the automated flight system lay in the design of the actuators, for example for controlling the throttle or the roll and pitch angle of the rotor head. Since standard actuators available on the market did not meet the special requirements for controlling the uncrewed cargo transporter, the DLR researchers developed actuators specially adapted for the ALAADy demonstrator. Initial flight tests have been being carried out since 2018 and the automation of flight procedures is currently being developed in stages. In addition, researchers are working to clarify the legal constraints on the operation of uncrewed flight test vehicles of this class. In doing so, they hope to determine how uncrewed drones can be integrated into standard airfreight chains.

Since 2016, as part of the ALAADy project, DLR researchers have also been examining the economics of uncrewed freight transport, as well as identifying upcoming challenges and potential areas of application. Such research is laying the foundations of the demonstration project. The aim of this part of the project is to develop potential strategies to mitigate the risks associated with uncrewed flight operations. These may include the use of flight restrictions such as, for instance, using low flight altitudes and avoiding densely populated areas. Theoretical research has been completed on payloads of up to one tonne. In addition, market analysis has been conducted to define the scenarios in which such an approach might be economically viable. Aircraft configurations and ways of integrating them into the existing air traffic system have also been investigated.

National Experimental Test Centre for Unmanned Aircraft Systems in Cochstedt

Among other applications, Unmanned Aerial Systems (UAS) are already assisting with disaster relief and the transportation of medical supplies to remote areas. As a result, the entire uncrewed aviation sector is currently experiencing rapid growth, which is illustrated by the development of new concepts and technologies. However, the developing, testing, construction and operation of UAS are posing new challenges for research and industry, especially with regard to urban air mobility.

In order to obtain the necessary approvals, it is necessary to comprehensively test and certify these novel systems under realistic conditions within a controlled environment. Research is also required in order to determine public acceptance, as well as the impact of UAS on society. Such investigations would focus on noise pollution, safety and environmental effects, as well as clarifying unresolved legislative issues. The establishment of the testing centre in Saxony-Anhalt, along with ongoing activities at the state level, are intended to establish a highly innovative research network that is unique within Europe. As a result, research and testing completed in Germany will help shape the future of uncrewed flight.


Print this page | E-mail this page