This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

“Flying fish” robot can propel itself out of water and glide through the air

12 September 2019

A bio-inspired bot uses water from the environment to create a gas and launch itself from the water’s surface.

Image courtesy of Imperial College London

The robot, which can travel 26m through the air after take-off, could be used to collect water samples in hazardous and cluttered environments, such as during flooding or when monitoring ocean pollution.

Robots that can transition from water to air are desirable in these situations, but the launch requires a lot of power, which has been difficult to achieve in small robots.

Now, researchers at Imperial College London have invented a system that requires just 0.2g of calcium carbide powder in a combustion chamber. The only moving part is a small pump that brings in water from the environment the robot is sat in, such as a lake or ocean.

The water and the calcium-carbide powder then combine in a reaction chamber, producing a burnable acetylene gas. As the gas ignites and expands, it pushes the water out as a jet, which propels the robot clear of the water and into a glide of up to 26m.

The details of the robot are published in Science Robotics.

Lead researcher Dr Mirko Kovac, Director of the Aerial Robotics Laboratory at Imperial, said: “Water-to-air transition is a power-intensive process, which is difficult to achieve on a small-scale flying vehicle that needs to be lightweight for flight.

Image courtesy of Imperial College London

“We have used water-reactive chemicals to reduce the materials that the robot needs to carry. Since the chamber fills passively and the environmental water acts as a piston, we can create a full combustion cycle with only one moving part, which is the pump that mixes the water with the fuel.”

The team tested the robot in a lab, in a lake, and in a wave tank, showing that it can escape from the water’s surface even under relatively rough conditions. While similar robots often require calm conditions to leap from the water, the team’s invention generates a force 25 times the robot’s weight, giving it a greater chance of overcoming the waves.

The robot, which weighs just 160g, can “jump” multiple times after refilling its water tank. This could allow it to float on water and take samples at multiple points without additional power, saving energy over longer distances compared to an electrically powered robot.

The team are now working with the Swiss Federal Laboratories for Materials Science and Technology (Empa) to build new vehicles using advanced materials and begin field trials of the robot in a range of environments, including monitoring the oceans around coral reefs and offshore energy platforms.

Raphael Zufferey, first author on the paper said: “These kinds of low-power, tether-free robots could be really useful in environments that are normally time- and resource-intensive to monitor, including after disasters such as floods or nuclear accidents.”

The tests were carried out in the Brahmal Vasudevan Multi-terrain Robotics Arena, which was founded on a philanthropic gift from Mr Brahmal Vasudevan.


Print this page | E-mail this page