This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

New thermally conductive adhesives in practical packaging

24 September 2019

Intertronics has added three products to its range of thermally conductive adhesives from its partner Polytec PT.

Users will benefit from convenient side-by-side cartridge packaging, which simplifies application. The adhesives have added functionality, including high thermal conductivity (2.2W/mK), very good adhesion, flexibility and high temperature resistance. 

When used as a bonding technique, thermally conductive adhesives fasten components to create a durable mechanical connection, while enabling heat to transfer from the warmer component to the colder component. Thus, in many cases, thermally conductive bonding, in particular with epoxies, is an alternative to conventional connection processes such as soldering, welding or mechanical attaching.

The processing of two-component systems is often a challenge in practice. On the one hand, the mixing ratio of resin and hardener must be kept as accurate as possible. On the other hand, both components must be sufficiently mixed to ensure proper curing of the material.

In order to address the inherent challenges when processing two-component materials manually, Polytec PT has developed a range of thermally conductive adhesives that are available in side-by-side cartridges. Both components of the adhesive are already filled in the correct mixing ratio and can be easily dispensed by means of a dispensing gun. Resin and hardener mix automatically in the attached static mixer.

The adhesives are ceramic-filled and thus electrically insulating, two-component products which cure at room temperature. If desired, the cure can be accelerated by heat. The variants differ in their thermal conductivity, temperature resistance and their mechanical properties.

Polytec TC 406 is characterised in particular by its high thermal conductivity and mechanical strength. Polytec TC 411 is a flexible thermally conductive adhesive that is able to compensate for thermo-mechanical stress and also adheres well to difficult-to-bond plastic surfaces. Polytec TC 422 has a very good adhesion especially to metallic surfaces and a high temperature resistance.

For more information on these new thermally conductive adhesive, visit https://www.intertronics.co.uk/ or call 01865 842842 to speak to an expert.


Contact Details and Archive...

Print this page | E-mail this page