This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

McDonald's deep fryer oil used for high-end 3D printing resin

04 February 2020

Researchers at the University of Toronto Scarborough have, for the first time, turned waste cooking oil into a high-resolution, biodegradable 3D printing resin.

The plastic butterfly printed from the researchers’ cooking oil-derived resin showed features down to 100 micrometres and was structurally and thermally stable (photo by Don Campbell)

Using waste cooking oil for 3D printing has significant potential. Not only is it cheaper to make, the plastics made from it break down naturally unlike conventional 3D printing resins.

“The reasons plastics are a problem is because nature hasn’t evolved to handle human-made chemicals,” says Andre Simpson, a professor at U of T Scarborough’s department of physical and environmental sciences who developed the resin in his lab.

“Because we’re using what is essentially a natural product – in this case fats from cooking oil – nature can deal with it much better.”

Simpson first became interested in the idea when he got a 3D printer about three years ago. After noting the molecules used in commercial resins were similar to fats found in cooking oils, he wondered whether one could be created using waste cooking oil. 

One challenge was finding old cooking oil from a restaurant’s deep fryers to test in the lab. Despite contacting several major national fast food chains, the only one that responded was McDonald’s. The oil used in the research was from one of the hamburger chain’s Scarborough restaurants.

Simpson and his team used a straightforward one-step chemical process in the lab, using about one litre of used cooking oil to make 420 millilitres of resin. The resin was then used to print a plastic butterfly that showed features down to 100 micrometres and was structurally and thermally stable, meaning it wouldn’t crumble or melt above room temperature.

“We found that McDonald’s waste cooking oil has excellent potential as a 3D printing resin,” says Simpson, an environmental chemist and director of the Environmental NMR Centre at U of T Scarborough.

Rajshree Biswas, a PhD student in the lab of U of T Scarborough Professor Andre Simpson, shows off biodegradable plastic butterflies made using a 3D printer and resin derived from McDonald's waste cooking oil (photo by Don Campbell)

Used cooking oil is a major global environmental problem, with commercial and household waste causing serious environmental issues, including clogged sewage lines caused by the build-up of fats.

While there are commercial uses for waste cooking oil, Simpson says there’s a lack of ways to recycle it into a high value commodity such as a 3D printing resin. He adds that creating a high value commodity could remove some of the financial barriers with recycling waste cooking oil since many restaurants have to pay to dispose it. 

Conventional high-resolution resins can cost upwards of US$525 per litre because they’re derived from fossil fuels and require several steps to produce. All but one of the chemicals used to make the resin in Simpson’s lab can be recycled, meaning it could be made for as low as US$300 per tonne, which is cheaper than most plastics. It also cures solid in sunlight, opening up the possibility of pouring it as liquid and forming the structure on a work site.

Another key advantage is biodegradability. The researchers found that burying a 3D printed object made with their resin in soil lost 20 percent of its weight in about two weeks.

“If you bury it in soil, microbes will start to break it down because essentially it’s just fat,” Simpson says.

“It’s something that microbes actually like to eat, and they do a good job at breaking it down.”


More information...

Print this page | E-mail this page