This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Lite Pressure Lee Spring series provide the delicate touch

20 May 2020

Lee Spring is aware there are many devices and equipment mechanisms that require a light touch – delicacy rather than power is the main requirement.

Devices and equipment mechanisms also require consistent reliability and longevity in service with pressures in the single-digit psi range.

The Lee Spring Lite Pressure range of compression springs is a high-performance response to that need for applications such as relief/check valves, pistons, motor brushes and controls, displays, syringes, control flanges, toys and dispensers.

The Lite Pressure compression spring series is ideal when a relatively low spring rate or workable load is needed in dimensions not normally available in a conventional compression spring. This makes the Lite Pressure series more responsive or sensitive to lighter loads than conventional compression springs. The springs are made of passivated and ultrasonically cleaned Stainless Steel type 316 for excellent corrosion resistance.

Following the Lee Spring ex-stock catalogue policy, Lite Pressure™ springs are available on rapid delivery to meet this very specific need, supported as always by custom design service when required.

Further information on Lee Spring products can be found on their website – www.leespring.co.uk or follow them on twitter –https://twitter.com/leespringuk.


Contact Details and Archive...

Print this page | E-mail this page