This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Soft-touch sealed remote control enclosures

29 January 2009

The new TEKO ‘OV-IP’ enclosures have been designed for small RF or infrared remote control devices which are fitted on a keyring.

These modern and highly tactile cases are manufactured using the latest dual shot moulding technique, combining grey ABS with black ‘soft-touch’ rubberised TPE. Each case consists of a single moulding which is folded over at the key ring end and secured by two self tapping screws, thus providing a high protection class of IP65.

Four standard models are offered with one, two, three and four rubberised push buttons. Inside, there is room for a single PCB which can be located on the ribs provided. Where an LED is fitted to the PCB to indicate operation of the unit, it can be viewed through a Ø 1.5 mm indicator lens which is fitted in the top section. There is also room for a PCB mounted type CR 2032 battery cell.

‘OV-IP’ cases have external dimensions of 56.8mm x 44mm x 14.5mm and include a location bar at one end for fitting the key ring or a neck chain.

TEKO can also supply these enclosures with silk-screen printed legends and logos. The cases can also be moulded in alternative colours.


Contact Details and Archive...

Print this page | E-mail this page