This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Hall effect throttle position sensor for motorsport applications

23 November 2009

Penny + Giles has introduced a throttle position sensor - the TPS280DP - which incorporates a factory programmable Hall effect sensor with two outputs that can be programmed individually for angular range, output range and direction. the unit is mechanically interchangeable with most existing throttle potentiometers using 32mm mounting centres and is designed to interface with most common throttle body D type spindles. The sensor is available with 200mm or 500mm cable lengths, with or without an MSS4P Mini Sure Seal connector fitted to the DR25 sheathed spec 55A cable.

TPS280DP can operate from either a 5Vdc regulated or 9-30Vdc unregulated power supply and has over-voltage protection to 40Vdc. It can be supplied programmed with any one of 341 different angles in the range 0-20 to 0-360 degrees in one degree increments and has a 12 bit resolution (0.025%) over the selected angular range.

TPS280DP has no contacting sensor parts, which ensures there is no signal degradation over the lifetime of the sensor. The sensor has a tested life of more than 20 million operations – more than six times the life of an equivalent potentiometer. When powered with 5Vdc, the TPS280DP has an operating temperature range from -40 to +140ºC, with a stability of less than ±30ppm/ºC.
For ease of configuration, TPS280DP is available with analog (0.5 to 4.5Vdc) or digital (Pulse Width Modulated) signal outputs as standard, but can also be factory programmed to offer 0.1 to 4.9Vdc output range, matching the equivalent signals from a potentiometer.

The sensor has been specifically designed to work in harsh motorsport environments and has excellent shock and vibration resistance. The sensor drive and body are totally sealed to IP69K, for a high level of protection against the ingress of dust, fluids and pressure cleaning.
 


Contact Details and Archive...

Print this page | E-mail this page