This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Our torsion springs are machined from solid material. .. Why?

15 December 2009


Machined torsion springs can provide very precise, linear deflection rates because virtually all-residual stresses are eliminated. The stress found in machined torsion springs is dominantly a pure bending stress providing a more reliable and accurate part.

Most wound torsion springs can achieve a rate of around 15%, the machined alternative can easily achieve 10% on rate and can be tuned to +/-2% for the more demanding applications..We like to think of it as .....Precision Elasticity...

The most common machined torsion spring configuration is the single start spring, which consists of a single continuous coil element, which starts at one end and terminates at the other end, much like its wire wound counterpart. We can supply both unwind and wind up torsion springs and in both cases the spring rates achieved are as linear as the geometry will permit.

However, it is not only the accuracy of rate which is an advantage, since the part is machined, we can incorporate any form of end attachment into the torsion spring. In the wound torsion spring format, tangs are produced by bending the last portion of wire into a set position. These tangs are bent inward or outward upon which a force can be applied. This not only limits the actual attachment designs available but induces high stress into this attachment area. In the machined torsion spring the tang is integral and without stress making it a far more rugged and reliable attachment.

Tang usage is designed to provide a moment on a torsion spring. To accomplish this, a force at a distance is employed. The spring provides the moment reaction, but there needs to be an additional reaction to the force. Typically with wound springs, using a tang, they are called upon to resolve this force by the ID or OD of the spring rubbing on a guide. With a machined torsion spring, the application of a moment is possible using a pure couple. Some examples of this being double tangs (external internal and longitudinal), slot, splines (internal and external) and bolt circle configurations. It is also possible to resolve the moment by an integral torque restraint on the coil side.How you attach the machined torsion spring is often up to your imagination, perhaps incorporating additional parts of the system into the single spring system.! However it is important to remember that the full breadth of machined attachments that resolve a PURE MOMENT are available to you.

The advantages of the machined spring product are numerous having proven itself in medical, aerospace, semiconductor and motor-sport industries to name a few. Wherever a wound spring is not able to meet your performance criteria or a new spring design requires ultimate accuracy and repeatability, the machined spring is the ideal partner.

The next time you require a spring in a critical or high duty cycle environment, the machined spring from Abssac Limited may be the answer to your design challenges

Key product advantages.

Release your burden overhead !
The product is machined to meet exact customer size and performance requirement
Predictable linear rates are available to meet application requirements
Special or custom end attachments can incorporated into the one piece design
Eliminate the need for multiple suppliers
Titanium, steels, high strength steels , aluminium and engineering plastics can be utilised
Unbeatable parallelism and perpendicularity improves reliability and performance

Contact Details and Archive...

Print this page | E-mail this page

Igus - Tech Up, Costs DownOmron Electronics