This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

High-precision, single-axis stages with built in linear motor

29 January 2010

The SLP series from Micromech is a high-performance, linear, single-axis stage offering long strokes and easy installation. The non-contact nature of the drive means low noise, a long life span and very low maintenance.

The first in the series is the SL P15 with Heidenhain LIDA279 1µm encoder, which produces a continuous force of 17N and peak force of 90N. The maximum acceleration is 3.5g and maximum velocity 3m/s with a repeatability of 0.0005mm. Maximum loads are 5kg horizontal and 3kg vertical. The strokes are 100 to 1,300mm in 100mm lengths (single forcer) and 100 to 1,200mm for the double forcer.

Next in the series with the same encoder is the SLP25 but this produces a continuous force of 80N and peak force of 340N.  Acceleration, velocity and repeatability are also the same but the horizontal load is up to a maximum of 30kg (vertical:15kg). The single and the double forcer strokes range from 200 to 1,200mm in 100mm lengths.

The third in the series is the SLP35 (again with Heidenhain encoder, same acceleration, velocity and repeatability as the other stages) produces a continuous force of 185N and 970N peak. Horizontal load is a maximum of 60kg and 30kg vertical. The single forcer strokes are 300 to 1,200mm and the double 300 to 900mm both available in 100mm lengths.


Contact Details and Archive...

Print this page | E-mail this page

British Encoder Products