This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Large diameter seals protect bearings in aggressive applications

14 April 2010

SKF has introduced a range of HDSF2 large diameter seals with PTFE excluder lip to protect bearings from the ingress of abrasive dust and particles in a wide range of aggressive duty applications. In particular, the new HDSF2 seals enable the typical operating life of bearings in horizontal grinding mills, coal pulverisers and vertical rolling mills to be more than doubled, helping end users to improve productivity while reducing repair and maintenance costs.
 
Bearings fitted with conventional seals and used in plant and equipment that is exposed to high levels of abrasive dust are highly susceptible to rapid degradation, of bearing and shaft surfaces and of lubricants; this can often lead to premature failure within months or operation.
 
To address this problem, the latest HDSF2 seals incorporate a standard primary elastomer sealing lip and metal case, plus an additional hard wearing PTFE excluder lip that is integrated within the body of the seal. This is designed to operate dry, with minimal friction torque, and requires no additional lubrication.
 
In tests carried out by SKF, the HDSF2 large diameter seals were found to be twice as effective at preventing the ingress of abrasive dust and other contaminants, than traditional lip seals.
 
HDSF2 seals can be used at operating temperatures between -40 and +200 °C and are suitable for use in equipment with shaft diameters from 165 to 1,606 mm.

 


Contact Details and Archive...

Print this page | E-mail this page