This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Atomising nozzles offer precise spray pattern

05 May 2010

The new atomising nozzles, available in both airless and air-assisted styles, generate a fifty-degree hollow cone spray pattern and offer precise, controlled atomisation in a compact package. The airless atomising nozzles do not require an external air supply and will atomize at low pressures.

Lee Products

The new atomising nozzles, available in both airless and air-assisted styles, generate a 50-degree hollow cone spray pattern and offer precise, controlled atomisation in a compact package.

The airless atomising nozzles do not require an external air supply and will atomize with pressures as low as 10 psi (on water). Available in multiple flow ranges, the nozzles can be installed directly onto a proprietary VHS micro-dispense solenoid valve for precise flow control using pulse-width modulation (PWM).

The air-assisted nozzles utilize an external air source to control the atomization, allowing lower operating pressures (5 psi). The pressure of the liquid and air can be independently controlled to fine-tune the flow rate and nozzle performance.

Atomising nozzles with special mounting configurations and PEEK wetted materials are available upon request.


Contact Details and Archive...

Print this page | E-mail this page

Igus - Tech Up, Costs Down