This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Network capable power supplies offer auto ranging facility

18 June 2010

Safety Power Group, has added two new models to its SM1500 series 1,500W dc power supplies. Based on 100kHz MOSFET power conversion technology, the new SM52-AR-60 and SM400-AR-8 models both offer auto ranging outputs over two ranges. The SM52-AR-60 outputs are 0 to 26V from 0 to 60A and 0 to 52V from 0 to 30A while the SM400-AR-8 ranges are 0 to 200V from 0 to 8A and 0 to 400V from 0 to 4A. Efficiency is up to 91% and active power factor correction is 0.99.

The new models offer additional interface choices, encompassing Ethernet, CANbus and Profibus while an analogue programming connector is available with an optional ISO AMP interface to prevent earth loops. Both supplies also enable simple master-slave set up via standard UTP cables eliminating the need for master-slave serial adapters. Other features of the new generation SM1500 series include interlock functions, high speed programming options, power sink indicators via front panel LED, digital encoder options, output on/off function and key lock functions to secure remote local and output on/off.

Additional features include very low output ripple and spikes, very stable output voltage or current (6.10-5 to 10-4), excellent dynamic response to load changes, and voltage/current control with 10-turn potentiometers (resolution 0.03%).

Operating from wide input voltage range 90 to 265Vac, 48 to 62Hz and designed for long life at full power, the new SM1500 series models are supplied with 48 hour burn-in to ensure the highest reliability. Both new models feature full protection against all overload and short circuit conditions and produce very low RF emissions for use in light industrial environments with RF immunity suitable for industrial applications. A low noise blower ensures quiet operation as fan speed adapts to temperature.


Contact Details and Archive...

Print this page | E-mail this page

Igus - Tech Up, Costs Down