This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Cable extension sensor features incremental encoder measurement source

18 June 2010

The Celesco SR1 series string pot sensor is now available with an incremental encoder measurement source. The SR1E, which is available exclusively in the UK from Variohm EuroSensor, has a measuring range up to 3m with a resolution of 100 pulses per 25mm of travel (+/- 2 pulses). The unit is housed in a polycarbonate enclosure protected to IP67.

The sensor's maximum velocity and acceleration are 2m/s and 10g respectively. The operating temperature range is from -20ºC to +85ºC and the overall accuracy  is +/- 0.1% full scale. Repeatability IS +/- 0.05% full scale.

As with all string pot or cable extension sensors from Celesco, installation is very straightforward with no critical alignment required. The nylon coated stainless steel cable is fully spring loaded, is easily attached to the object under motion and fully retracts into the body of the SR1E ensuring a compact installation envelope of around 200 x 120 x 100 mm (w x h x d).


Contact Details and Archive...

Print this page | E-mail this page

Drives and Controls 2020