This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Easily mounted bearings with cast iron or pressed steel housing options

21 June 2010

Easily mounted bearing units from NKE feature cast iron or pressed sheet steel housings into which a range of different bearing inserts can be fitted. The cast iron housing versions are suitable for moderate to high loads, while the galvanised pressed sheet steel housings are suitable for smaller loads. The latter have a much lower weight than their cast counterparts and are exceptionally easy to install.
 
The bearing inserts consist of single-row deep groove ball bearings that are sealed on both sides against moisture, splash water and dust. Various seal types are available for different applications. The bearings are secured to the shaft with set screws or eccentric locking collars, which simplifies their installation. The bearings are factory lubricated and most bearing-housing combinations can be relubricated during operation to extend their service life. The special version SQ171 is coated for enhanced corrosion protection.
 
The spherical design of the bearings’ outer diameters and the housings’ inner diameter, ensure that these units are self-aligning.


Contact Details and Archive...

Print this page | E-mail this page