This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Flexible programmable power supplies now cover more output voltage ranges

05 July 2010

TDK-Lambda has added further models to its Genesys 3.3kW and 5kW compact 2U format programmable power supplies. The new products complement existing models in the Genesys 1U, 2U, 3U and Half-Wide portfolio that covers power ratings from 750W to 15kW. New 0 - 200Vdc output models, available in both the Genesys 3.3kW and 5kW, are suitable for applications related to the testing of solar cell arrays, and for use in electrolysing sulphuric acid in water purification plants.

Extending the Genesys 5kW range, models with 0 - 400Vdc and 0 - 500Vdc outputs are suitable for applications involving the manufacture and test of flat-panel television displays, where high-power, high-voltage dc supplies are a common requirement.

As with all of the Genesys 3.3kW and 5kW models, these power supplies have three-phase inputs for operation from 170 to 265Vac or from 342 to 460V, and the 3.3kW models are additionally available in single-phase versions suitable for operation from 170 to 265Vac.

Like all of the programmable power supplies in the Genesys range, the new models feature active power factor correction, and a number of safety features, including user-selectable Safe-Start and Auto-Re-Start options. With Safe-Start, the power supply returns to the last used settings after a power interruption, but with the output disabled. With Auto-Re-Start, the supply resumes normal operation without intervention after a power interruption, thereby meeting typical requirements for unattended use.

Common to all Genesys models is a built-in RS232/485 interface. Using this, up to 31 power supplies may be controlled in daisy chain over an RS485 line. Analogue remote programming is user selectable 0 - 5V or 0 - 10V via DIP switches on the rear panel.

Other digital and isolated analogue interfaces are optional: the IEEE digital interface is IEEE-488.2 and SCPI compliant, and a wide selection of LabVIEW drivers is available. Isolated analogue programming options include either 0-5V and 0-10V, or 4-20mA control. An LXI-compliant LAN interface is also available.

Higher power systems can be realised by connecting up to four units in parallel. In advanced parallel configuration, the master unit reports total system output current, which means that the four units appear as a single power supply, increasing flexibility for system designers.

CE marked in accordance with the Low Voltage Directive, Genesys conducted and radiated EMI conforms to EN55022-A, FCC-A. Safety approvals include UL60950-1 and EN60950-1. All models carry a five-year warranty.


Contact Details and Archive...

Print this page | E-mail this page

Drives and Controls 2020