This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Miniature moulded chain drives in non-magnetic black acetal

06 August 2010

The A 6M 7M12 series ultra miniature inch and metric 3.117 mm pitch moulded chain drives from Stock Drive Products are made of pre-lubricated, non-magnetic black acetal, and are suitable for operation over a wide range of temperatures from -40°C to +121°C. The chain features a unit-link design that eliminates the need for a master link. Each unit-link measures 2.08mm high and 4.12mm wide. A length of 321 links snapped together will equal one metre and a length of five metres of chain weighs only 0.031kg. Chain operating speeds of up to 5.1m/s, around smaller eight-tooth sprockets, and maximum operating loads of up to 0.9kg. of tension are recommended.

The A 6M 7M12 sprockets are stocked in 14 sizes from 8 through 48 teeth. Three bore sizes are stocked for press fitting the sprockets to 3, 4, and 6 mm shafts. Sprockets that have 24 or more teeth are molded with a spoked configuration. Outer diameters range from 9.4mm (.371in) to 49.3mm (1.939in) and pitch diameters from 8.1mm (.318in) to 47.4mm (1.865in). The A 6M 7M12 series is available for immediate delivery from SDP stock.


Contact Details and Archive...

Print this page | E-mail this page