This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Level transmitter is easy to commission

28 January 2011

Burkert’s Ultrasonic Level Transmitter Type 8175 provides continuous level measurement at distances of up to 10m. Integrating an ultrasonic sensor and a transducer with a large 8-digit multi-language display in a splash-proof IP65 or immersion-proof IP67 housing, the Type 8175 offers users a teach-In function for easy commissioning, and also delivers low total cost of ownership.

The 8175 is a non-contact filling level transmitter that can be used in both open and closed vessels. It is simple to use, with a menu-guided operation and 8-digit alphanumeric display. The integrated 'Teach-In' and 'Simulation' functions allow different tank shapes (cylindrical, cubic, spherical) to be easily programmed via fixed default shapes, or at complex tank shapes step-by-step. Importantly, the simulation functions allow the system to be tested under dry-run conditions, and the resulting measured value can be shown as a level, a distance (in cm, m, inch or feet), or direct, as a volume (litre, m3, Imp. gal or US gal).

Type 8175 level transmitters integrats a range of fail-safe features, including signal loss, power supply failure, and level or temperature alarms, which can be activated with an adjustable time delay. In addition, a range of filter functions control the return echoes and automatically eliminate all interference due to elements of the vessel.

The 8175 transmitter is powered with 18-32 Vdc (optionally 115/230 Vac) and features a three-wire 4-20mA output for direct control of a continuous control valve, interface to a PLC, or for monitoring. Two optional 3A relays can be also configured as alarms or latched for automatic fill or empty operations.


Contact Details and Archive...

Print this page | E-mail this page