Siemens webinar to launch compact industrial PCs with new Intel Atom
02 June 2011
Siemens Industry Automation and Drive Technologies is hosting a webinar on Tuesday 7 June to launch its extended range of embedded industrial computers, now including a new product line of compact and energy-saving PCs in the nano-format. The online launch will consist of two sessions, 09.00am – 9.30am (GMT) and 4.00pm – 4.30pm (GMT), both concluding with 15 minutes of Q&A sessions with the instructors.
At the core of the Simatic IPC227D Nanobox PCs and the Simatic HMI IPC277D Nanopanel PCs are the latest generation of Intel Atom processors. The Nano IPCs are designed for maintenance-free, 24-hour service even when subjected to high temperatures, vibration, shocks and electromagnetic interference. The units are suitable for simple control, visualisation and communication tasks and can also be used as data loggers in areas such as machine building, traffic control, building automation systems or energy transmission.
Ready-to-run packages comprising both computers and software allow the units to be put into service immediately. In recognition of its innovative product design, the Simatic IPC227D Nanobox PC has received the famous iF product design award.
The Atom processors of the power-optimised E6xx series from Intel form the basis for the new Simatic IPC227D Nanobox PC and Simatic HMI IPC277D Nanopanel PC embedded industrial PCs from Siemens Industry Automation and Drive Technologies. The power-optimised Atom processors offer high-speed data processing and communication with low heat dissipation and a power consumption starting at just eight Watts. The devices boast high resistance to vibration and shock and have an integral 24 Volt industrial power supply unit. For maintenance-free use – for example in machine building, marine applications or in building or traffic control systems – the units can be operated without fans at ambient temperatures of up to 50 degrees Celsius.
Compact-Flash cards with up to eight GB capacity or solid-state drives (SSD) of up to 50 GB can be used as robust bulk storage devices. As an option, Siemens offers a 250 GB hard disk for the Nanobox PC. Likewise, a retentive memory of up to 512 KB can be integrated if required and also used for applications without batteries. Within the buffering period, 128 KB of data can be written, for example to back up important machine data in the event of a power outage.
The Simatic IPC227D Nanobox PC with its compact dimensions of 191x100x60 mm (WxHxD) fits not only inside small control cabinets but also directly into a machine or the machine base. It can be installed very flexibly in the four standard versions of DIN rail, wall, portrait or landscape mounting. All interfaces are located on one side to simplify the connection of cables to the device. The unit can be operated without a fan at ambient temperatures of up to 50 degrees Celsius in almost any installation position.
In the basic configuration, the Nanobox PC is completely maintenance-free, thanks to its dustproof enclosure and the absence of battery, fan or hard disk. For expansion purposes, the IPC227D has the option of one PCIe slot, three additional serial interfaces or four digital inputs and outputs (24V DC). For fast device diagnosis, the Nanobox PC has four status LEDs, three of which are fully programmable. Diagnostic software is pre-installed to provide comprehensive analysis.
The Simatic HMI IPC277D Nanopanel PC is available with 7", 9" and 12" high-resolution industrial touch displays in widescreen format, with a wide viewing angle. Devices with larger display sizes are currently being developed. Thanks to LED backlighting that is dimmable up to 100%, the power consumption of the Nanopanel PCs can be significantly reduced.
In all its versions, the IPC227D is equipped with four USB-2.0 ports, while the HMI IPC277D has at least three. Both devices have two Gigabit-Ethernet ports with teaming capability, of which one can optionally be used as a Profinet interface with real-time functionality. An RS232 interface is available as a serial port. Versions of the Nanobox PC with an RS485 or CAN interface are also available as options. By means of the Wake-on-LAN function, the devices can be remotely switched over from the active state to the standby mode, thereby reducing the energy consumption of the computer.
The Industrial PCs can be configured online and can be supplied on request with a pre-installed and activated operating system – Microsoft Windows XP Professional or Windows Embedded Standard 2009 – and have assured long-term availability. Versions with Windows 7 and Windows Embedded Standard 7 are currently under development. Ready-to-run packages including SIMATIC WinCC V11 visualisation software or WinAC RTX (F) 2010 control software, which is also available in a fail-safe version for use where the most stringent safety requirements apply, are also being developed.
Places are available for the webinar, to register click here.
Contact Details and Archive...