This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Side-sealed direct-drive stage has increased width for heavy load sub-micron positioning

28 June 2011

Aerotech's PRO-LM series direct-drive, brushless linear servo motor driven stages now include a 280mm wide version, available in eight travel options from 300mm to 1.5m, for high throughput and heavy load precision positioning in industrial environments. The side-sealed/hard top and fully protected stages feature heavy duty linear motion guide bearings, sub-micron level encoder feedback and optional cable management, and are now available in nominal widths of 165mm, 225mm and 280mm.

The new competitively priced PRO280LM is built upon the successful side sealed design that Aerotech has developed over several generations of linear motor and ballscrew driven stages. The aluminium hard top cover, finished in a protective scratch resistant hard coat, is a much preferred alternative to soft fabric or plastic bellows stage covers, especially for applications such as laser machining. The vertical tensioned side straps fully seal  the internal stage components from machining or process debris.

A wide selection of optional tabletops with steel inserts allow X-Y, XZ or YZ configurations with other PRO series stages with orthogonality certified to 5 arc-seconds. Tabletop plates are also available for Aerotech ADRS, ADRT  and AGR series rotary stages or to suit customer workpiece mounting in metric and inch hole patterns. Cable management  is available for single axis up to customer specified XY, XYZ and XYZ+Rotary stage configurations.


The PRO280LM has a positioning resolution of 250 nanometres from a choice of 0.1 micron line driver or amplified sine output encoders. Other impressive specifications include HALAR calibrated accuracy to +/- 3 microns for the 1.5m travel version (+/- 2 microns for the 300 mm travel stage) with  speeds to 2m/s and acceleration to 3g. 

With complementary high specifications for stage flatness, pitch, yaw and roll, and with a maximum horizontal and side load capability to 150kg, the PRO280LM is well placed for heavy duty industrial applications where no-compromise  manufacturing quality and fastest production throughput are of primary importance.

Aerotech's brushless direct-drive linear servomotor technology guarantees extremely smooth motion with exacting speed control and precise in-position stability, allowing the PRO280LM to be equally effective for scanning or step/repeat applications or for compound axis contouring. The use of non contacting motors and feedback encoders combines with long life wiper sealed linear motion guide bearings for a rated MTBF life of 20,000 hours with extremely low maintenance.

Aerotech manufactures a wide range of advanced motion controls that optimise the performance capability of the PRO-LM series with powerful motion specific and machine interfacing commands. These include the Position Synchronised Output (PSO) command that completely synchronises real time multi-axis position with laser firing, camera capture, data acquisition or NDT test triggering to produce the highest quality parts or ultimate accuracy test procedures - with minimal cycle time and fastest production throughput.

Aerotech's advanced controls include set-up, diagnostics and comprehensive features that reduce position errors, improve settling times and provide a host of other production and commissioning time-saving benefits.

Aerotech's motion systems include motor power and encoder cables plus performance and calibration related documents. Complete machine frames and bases can be included in the scope of supply.


Contact Details and Archive...

Print this page | E-mail this page