This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Eurobond Adhesives Launches New Glob Top For Electronic Applications

01 January 2006

VITRALIT 1691 is a dual cure black Glob-Top epoxy sealant. It is ideally suited to all types of microchip or resistor coating/ sealing applications. It can be cured either by UV light in approximately 2 minutes, or by heat curing at 110ºC for two minutes. It can even be cured with a combination of both heat and UV.

Vitralit 1691 has a high ionic purity (NA +< 10 ppm) and when cured has a high temperature resistance with good thermal stability. Once fully cured it forms a tough resilient coating that will withstand temperature ranges from -40ºC to +180ºC and has excellent moisture resistant properties and can be used for intrinsically safe applications.In addition to a fast UV / thermal cure it can also be cured with infra - red radiation.

Under the ideal storage conditions of +5ºC, kept in closed original containers, VITRALIT 1691 can be stored for approximately six months. GELFAST - Is an optically clear UV curing Gel adhesive. It is ideally suited for bonding glass, plastic and metal combinations where good gap fill, moisture resistance, flexibility and high peel strengths are required.

Typical applications are bonding door magnets and door handles to glass doors, acrylic fabrication work, glass fabrication and art glass.

Contact Details and Archive...

Print this page | E-mail this page

Phoenix Contact