This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

High-pressure control valves are suitable for chemical injection

14 July 2013

An ultra-high pressure control valve which is designed to operate on applications with up-stream pressures of 4,135bar is the latest addition to the Badger Meter Control Valve range.

Available in the UK from Pump Engineering, the Type HP-60 control valve utilises a 17-4 PH body along with a solid Stellite inner valve assembly.

The HP-60 valve is suitable for use in industrial research and process pilot plants on liquids and gases, typically on chemical injection applications such as the production of high pressure, low density polyethylene (HPLDPE).

Standard features include, pressure rating to 4,135bar at 38ºC,  a wide range of interchangeable trims, choice of linear or quick opening trims, ANSI Class lll shut-off (size P-1 through P-9) and ANSI Class lV shut-off (size K through O).

The inner valve (plug and seat) is constructed from solid Stellite while titanium nitride coated Stellite is available as an option.  Standard packing is Torlon/PFA CV rings.

The valves can be supplied with standard (air-to-open, air-fail-close, air-to-close, air-fail open) actuators.  However, actuators in Stainless Steel with integral top mounted positioner or side mounted positioner, are also available.  A wide range of accessories, such as filter regulators, gauges, I/P converter, limit switches and solenoids, are also offered.


Contact Details and Archive...

Print this page | E-mail this page

Igus - Tech Up, Costs Down