This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

New acoustic emission sensor for condition monitoring and preventative maintenance

03 March 2014

he new Type 8152C Piezotron® sensor is ideal for monitoring acoustic emissions (AE) above 50 kHz on the surface of metal machines, structures and systems for preventative maintenance of rotating machines, monitoring cutting tools and press tools to detect signs of incipient failure and leakage monitoring of tanks, pipes and valves.

The rugged welded housing, wide operating temperature range from -54°C to 165°C and IP65 rating make the new sensor suitable for use in the most challenging industrial environments. ATEX Zone 0 and Zone 2 intrinsically safe versions are available for use in hazardous areas.
 
Two frequency ranges, 50 to 400 kHz and 100 to 900 kHz, are offered in all versions. An integrated impedance converter provides a low impedance voltage output signal and a custom designed coupler supplies power to the sensor and provides signal processing.
The AE Sensor is simply mounted with an M6 or ¼ inch screw or a magnetic clamp onto the surface of the structure.

The sensing element is acoustically isolated from the housing by design and is well protected against external noise and is ground isolated to prevent ground loops. Kistler AE sensors feature a very high sensitivity for surface (Rayleigh) and longitudinal waves over a broad frequency range and are designed to withstand high energy waves.

These new sensors provide a simple to install and highly reliable method of monitoring bearing based machinery, pressure vessels or flow turbulence with high frequency acoustic signatures. AE measuring can be used where vibration sensors are unsuitable due to the high energy nature of the emitted elastic waves. It also allows the reliable detection of fatigue and failure signals even in a high vibration environment.

The measuring chain may be used for non-destructive testing or permanent online observation of continuous processes for condition monitoring and preventive maintenance applications. The high operating temperature of 165ºC and ATEX certifications option allows use in hazardous environments, such as processing industry applications where explosive gas or flammable dust is present.


Contact Details and Archive...

Print this page | E-mail this page