This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Visualising machine safety status with Omron's NB HMI

30 November 2014

Omron’s NB HMI series now support the Omron G9SP Programmable Safety Controller, providing machine builders with a feature rich and cost-effective system.

The NB HMI series can be directly connected to Omron’s G9SP Safety Controller via serial communications. Direct connection allows easy monitoring of operational status and details of errors monitored by the G9SP controller. Machine  safety errors can be shown graphically; for example, a door that is not closed or a broken switch.

The G9SP can control both safety and standard I/O, which would otherwise require multiple controllers. Some safety controllers only control safety I/O and require a separate network unit to connect to an HMI, which adds extra cost and increases space requirements.

NB HMI series is available in sizes from 3.5in to 10in TFT colour touch screen with long-life LED backlighting and a wide viewing angle.

Omron G9SP support is provided by the free-of-charge NB-Designer software, version 1.32 or later.


Contact Details and Archive...

Print this page | E-mail this page

British Encoder Products