This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

igus introduces gantries built on its drylin E linear axis system

22 March 2015

From simple linear systems to complex, three-dimensional automation, measurement and positioning applications, the drylin E gantries utilise proven tribo technology, which means that all systems feature sliding, self-lubricating linear components.

Used to implement three-dimensional applications, the drylin E room gantry is based on a flat gantry system with a single vertical axis. The room gantry has a working space of 500x500x100mm and can carry payloads of up to 2.5kg.

With an accuracy of up to 0.1mm and speeds of up to 0.5m/s, the room gantry is ideal for general pick and place applications, including those found in the medical and microelectronics industries where specific placement and careful handling is essential.

drylin E flat gantries have a working space of 300x300mm and can lift loads up to 10kg. Speeds of up to 3m/s can be reached depending on the applied load with an accuracy of 0.5mm. As with the flat gantries, the drylin E line gantries can carry the same payloads but with a working space of 500x100mm, and speeds up to 1m/s with 0.2mm accuracy. 

With the limit switch assembly housed within a T-slot, the complete length of the gantry’s profile can be used, enhancing its capabilities. Standard drylin E gantry sizes are available for delivery within 24 hours, while custom gantries can be configured and requested online here.


Contact Details and Archive...

Print this page | E-mail this page