Guide To Suppliers

PennEngineering

EMEA Regional Marketing

Telephone : +353 91 7471186
Email : lfoy@pemnet.com
Web : www.pemnet.com

Article archive for PennEngineering;

Self-clinching threaded standoff fasteners(01/06/2018)

PEM TSO4self-clinching threaded standoffs from PennEngineering offer reliable fastener solutions to securely stack or space components in ultra-thin stainless steel assemblies.
Five benefits of using fasteners on carrier tape to reduce production line waste(04/09/2017)

One of the main goals for production engineers in manufacturing through utilising lean principles is to drive up quality and reduce wastage from the value stream; this can be achieved either by process automation or eliminating one or more steps in the process.
Fasteners enable secure and reliable attachment using minimal hardware(25/10/2016)

Several dedicated families of PEM fasteners from PennEngineering enable secure and reliable attachment for a wide range of printed circuit board applications.
Self-clinching fasteners mount and/or space components(15/09/2016)

PEM Type MSO4 microPEM self-clinching standoff fasteners from PennEngineering enable components to be mounted and/or spaced in compact electronic assemblies.
Overcoming traditional fastener challenges with self-clinching technology(09/09/2016)

Self-clinching fastener technology has advanced significantly in more than 70 years since invention in the US and has enabled the development of ever-thinner, lighter and stronger end-product designs, marking a significant change in the story of joining sheet metal.
Flush-head studs with X-Press threads for quick mating(19/05/2016)

PEM flush-head studs integrating X-Press threads enable quick mating with push-on plastic nuts, wire tie products, or other plastic fasteners in thin metal assemblies.
Self-clinching pins for compact electronics(16/03/2016)

PEM Type MPP microPEM self-clinching pins from PennEngineering provide solutions for micro positioning and alignment applications.
Threaded metal inserts for permanent installation in plastic materials(07/02/2016)

SI threaded inserts from PennEngineering provide durable and reusable metal threads in plastic materials to accept mating hardware and subsequently allow for access to an assembly whenever required.
Surface mount fasteners offer variety of attachments for PCBs(16/01/2016)

PEM ReelFast surface mount fasteners from PennEngineering offer a variety of reliable attachment methods for printed circuit board applications.
Flush-head studs for quick mating with plastic fasteners(06/12/2015)

PEM self-clinching flush-head studs integrating X-Press threads enable quick mating with push-on plastic nuts, wire tie products, or other plastic fasteners in thin metal assemblies.
Surface mount spring-loaded captive panel screws(18/10/2015)

New PEM ReelFast surface mount spring-loaded captive panel screws from PennEngineering install precisely and permanently, where designed on printed circuit boards, to provide secure attachment and allow for subsequent access whenever necessary.
Self-clinching blind nuts feature ‘closed-end’ design(16/08/2015)

PEM self-clinching blind nuts from PennEngineering permanently install into thin metal sheets to provide reliable and re-usable metal threads for accepting mating screws and completing final component attachment in an assembly.
Fasteners for thin metal assemblies and PCBs(27/06/2015)

PEM R’ANGLE fasteners for thin metal assemblies and printed circuit boards create strong right-angle attachment points.
Brass surface mount fasteners for PC boards(07/06/2015)

New PEM ReelFast brass surface mount fasteners from PennEngineering are suitable for printed circuit board applications requiring superior electrical and mechanical attachment points.
Self-clinching fasteners for stainless steel or aluminium alloy sheets(17/05/2015)

microPEM TackPin Type T4 self-clinching fasteners from PennEngineering are suitable for installation into stainless steel or higher-strength aluminium alloy sheets.