Small, portable dew point hygrometer (17/07/2009)

At just 21cm by 17cm, weighing 1.5kg, and with a battery life of up to 48 hours typical usage, Michell Instruments’ new MDM300 Advanced Dew Point Hygrometer enables the user to take field measurements with the minimum of fuss. New developments in...

Sensor offers very rapid measurement of dew point as low as -70°C (29/06/2009)

Michell Instruments’ MDM300 advanced dew-point hygrometer provides faster measurements. Dew points as low as -70°C can now be measured accurately in less than 10 minutes – faster in many cases. This super-fast response does not rely on the sensor...

Flue gas analyser saves on installation and maintenance costs (22/06/2009)

Michell Instruments’ XZR-500 flue gas analyser features an innovative metallic sealed reference sensor (MSRS), which operates reliably in temperatures up to 1500°C. The analyser’s semi-in-situ location makes it easy to install, simple to operate and...

Dew point transmitter for easy installation at pressures up to 450 bar (07/01/2009)

The Easidew T.X. dew point transmitter from Michell Instruments has been enhanced to take accurate measurements in pressures of up to 450 bar or 6500 psi. The Easidew T.X. is a fully configured and calibrated moisture transmitter that can be...

Advanced oxygen analysers from Michell Instruments (16/12/2008)

Michell Instruments has introduced a range of high performance Oxygen Analysers. The new product line makes use of recent technological developments to measure oxygen at both trace (ppm) levels and percentage concentrations and is suitable for both...

Intrinsically safe dew point transmitter for CNG applications (01/09/2008)

Michell Instruments’ new Easidew TX IS dew point transmitter can be connected in a 2-Wire loop powered or 3-Wire configuration. It features a white HDPE sinter guard, providing particulate protection to less than 10 micron (impermeable to liquids)...

Self-contained dew point instrument for easy installation (13/06/2008)

The DryCheck dew point instrument has been launched by Michell Instruments as a response to demands from customers for an accurate, stable but economic instrument, with simple sampling system, which could be easily installed for use in a number of...

Dew point meter now offered with longer cables (01/04/2008)

The Optidew cooled mirror dew point meter offered by Michell Instruments can now be used for a wide variety of applications due to its increased cable length of up to 250 metres. In many industrial applications it is a critical requirement that the...

Sampling systems for dew point instrumentation (25/03/2008)

The ES10 Sampling System range has been launched by Michell Instruments to complement their range of accurate and stable dew point instrumentation. To ensure accurate and stable dew point or moisture measurement, it is important that the...

Dew point transmitter certified by ATEX and FM (07/02/2008)

Michell Instruments have received confirmation of the accreditation by FM Approvals for the intrinsically-safe version of their Easidew Transmitter. In addition to its ATEX certification, this allows the Easidew TX I.S. to be used in hazardous area...

Dewpointmeter showcased at MTEC 2008 (27/11/2007)

The new S8000 Integrale is the latest addition to the Michell Instruments Cooled Mirror Dewpointmeter product range, and will appear at MTEC 2008 for the first time. Available in several versions, the instrument offers high accuracy in dew point...

Dew point measurement (06/11/2007)

The new S8000 Integrale is the latest addition to the Michell Instruments Cooled Mirror Dewpointmeter product range. The S8000 responds to the latest feedback from many customers and humidity equipment users. Available in several versions, the...