Linear actuator powers heavy loads at continuous duty in tough environments
11 December 2009
Thomson has introduced the T130 ballscrew driven precision linear actuator now with a 50mm diameter screw for powerful actuation of static loads up to 80kN over stroke lengths of up to 2m. Together with the T90 Precision Linear Actuator (PLA) this new version of a T130 provides reliable industrial or outdoor positioning in a broad range of linear applications and the power and stroke to replace hydraulic systems with more precisely controlled electrical actuation.
By re-engineering its popular T130 actuator with a 50mm diameter screw, Thomson has increased its dynamic load capacity to 60kN and its static load capacity to a formidable 80kN for powerful pulling, pushing and positioning of high loads. When such large load capacity is not required, the newly engineered model offers a 350% increase in service life to 47,000km when operating at reduced load. The new T130 offers speeds of up to 2 m/s and extends the stroke of the standard model to an impressive 2m while maintaining good rigidity.
The smaller T90 is suitable for axial loads of up to 20,000N with a large stroke of up to 1.5m, providing precision positioning at speeds of up to 2m/s.
Like other actuators in the PLA range, the T130 and T90 are designed for long life operating at continuous 100% duty cycles with a repeatability of 0.05mm. Positioning accuracy of 0.05mm is achievable for many applications, with a maximum backlash of 0.1 or 0.2 for heavier loads. Fully preloaded systems are available on demand for higher precision.
PLA linear actuators are IP65 protected for use in industrial environments. Both the T90 and the T130 precision linear actuators are ideally suited to applications such as those in thermoforming, packaging machines, solar tracking and for replacing hydraulic and pneumatic components with more controllable mechanical actuation. Higher IP rating options and stainless steel versions are also available for harsher environments.
Determining the motor torque, speed and power based on application data has never been more straightforward with configuration tools available here or by contacting a local Thomson representative. A comprehensive range of Thomson gearheads, and Kollmorgen drives and servomotors can be ordered with the PLA series actuators, with mountings for other mainstream servomotors also available.
Contact Details and Archive...