This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Encapsulated DC-DC converters offer chassis or DIN rail mounting

16 May 2016

XP Power announced the DTE series of fully encapsulated single output DC-DC converters.

The series comprises three ultra wide input voltage range models offering 20 (DTE20), 40 (DTE40) and 60W (DTE60) output power. The units are available in either a chassis mount or a DIN rail format, offering flexibility to the designer of the end-product. The fully encapsulated package helps protect the converter from environmental factors often found in industrial applications, in addition to aiding heat dissipation.

These highly efficient converters, with model-dependant typical efficiency in the range 89–92 percent, run cooler and consume less power compared to other less efficient converters available in the market. The 20W DTE20 model measures 96.0 x 54.0 x 23.3mm, the 40W DTE40 just 112 x 63.8 x 25.6mm and the DTE60, 60W model measures 112.0 x 67.8 x 38.0mm. Two ultra wide 4:1 input voltage range options are based around nominal 24 (9 – 36) and 48 (18 – 75) VDC. Tightly regulated single output voltage options of 5.1, 12, 24 or 48 VDC are available across the range, and isolation is rated at 2500 VDC for 60 seconds.

The DTE series can accommodate a wide range of operating temperatures across the extended industrial range from -40 to +85°C. Full power is available up to a minimum of +70° depending on the model. Compliance to the international safety specification for IT equipment UL/IEC 60950-1 is standard across the range and they all meet the EN55022 Class A limits for both conducted and radiated emissions without the need for any external filtering components.

Protection features such as short circuit, output overload, input under voltage lock-out and output over voltage and a remote on/off capability are standard across the range. Front mounted input and output screw terminal connections provide ease of installation.

The DTE series is available from Farnell, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a three year warranty.  

Contact Details and Archive...

Print this page | E-mail this page

MinitecRegarl Rexnord