This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

Sponsored Article

Murrelektronik revolutionises IO-Link with IODD on-board

19 May 2016

Murrelektronik is the first manufacturer to offer "IODD on board" which allows you to “Plug & Play” when integrating IO-Link devices.

An IODD (IO Device Description) file describes sensors and valves. It contains information about the device’s identity, parameters, process data, diagnosis data, communication properties and other details.

Murrelektronik's new MVK Metal and Impact67 fieldbus modules have IODD files (for participating manufacturers IO-Link devices) integrated into the GSD file. If those devices - like IO-Link sensors or valve clusters - are included in an installation, this database is available and can be quickly integrated. Prior to this each new IO-Link master had to be individually integrated into the software taking up valuable time. If a large number of identical sensors had to be connected, the process had to be repeated for each new device on the network. This was a time consuming and error-prone process.

Now, with "IODD on board", the IO-Link master is configured by the control – and the setup is complete. Just “Plug & Play” and the job is done.

Another interesting feature of these new modules is the option to integrate IO-Link devices via asynchronous access. This option is also available on the new Cube67 IO-Link master module.

All of Murrelektronik's new IO-Link modules correspond to IO-Link specification 1.1. and are equipped with IO-Link Class A and B ports.

About IO-Link

IO-Link is a communication system that was established in 2006 to quickly and cost effectively integrate intelligent devices with a standardised connection into installations. IO-Link converts analogue data to digital data directly in the sensor. This enables transfer with cost effective, standard, unshielded cables. When identical IO Link sensors are replaced, no re-parameterisation of the sensors is required.

Click here to view the product.

Contact Details and Archive...

Print this page | E-mail this page