1 Paragraf - The capabilities of Paragraf graphene Hall Effect sensors under extreme conditions

This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

The capabilities of Paragraf graphene Hall Effect sensors under extreme conditions

17 May 2021

Oxford Instruments, a provider of high technology tools and systems for research and industry, has employed a modified version of the Paragraf GHS09CC sensor device to carry out measurements at temperatures and magnetic field strengths far beyond the scope of any other sensing solution.

The test set-up saw the modified Paragraf GHS09CC device exposed to a 14T magnetic field. This was applied via an Oxford Instruments’ superconducting solenoid magnet. The temperature level was taken down below 100mK, using the newly released Proteox dilution refrigerator. 

Normally under these harsh operating conditions, acquisition of field strength data would be impossible. The low temperatures involved would lead to quantum effects that would saturate the sensor. Even before reaching these extremes, other anomalies would impact upon sensor linearity, thereby making accurate measurements very difficult to achieve. 

As Ellie Galanis, Product Owner at Paragraf, explains: “Though there are huge opportunities to carry out fundamental research at these temperature levels, Hall Effect sensors have not been able to offer mK operation until now. The tests conducted by Oxford Instruments underline the quality of the graphene substrates we can fabricate for cutting-edge electronic systems, as well as our innate ability to tailor them as customer requirements dictate. There is no other cryogenic temperature Hall Effect sensor that is rated to these operational parameters, showing that we can really differentiate ourselves here.”

“High-resolution field measurement at ultralow temperatures and high magnetic fields has always been a challenge” adds Benjamin Bryant, Senior Development Engineer at Oxford Instruments. “Conventional Hall sensors can suffer carrier freeze-out at mK temperatures, and even if they could still function their heat dissipation is much too high. Graphene sensors give us and our customers the opportunity, for the first time, to monitor high magnetic fields in-situ in ultra-low temperature experiments.”

High energy physics labs and other fundamental research establishments have previously had to rely on off the shelf cryo-rated Hall sensors (rated to 1.5K at the lowest) or expensive custom NMR probes. These generate a considerable amount of heat, and this has a detrimental influence on the ability to maintain a mK environment and therefore the results obtained. 

In contrast, the Paragraf sensor generates 6 orders of magnitude less heat (dissipating nW rather than mW figures). Through optimisation of the constituent graphene, it can support linear operation – presenting customers with a ground-breaking sensing solution that is unmatched in terms of performance, data reproducibility and ease of calibration. 

The Oxford Instruments Proteox dilution refrigerator was pivotal in these tests. It has the capacity to support precisely controlled temperatures over an expansive 10 mK to 30K range, even when subjected to very high magnetic fields. Competing dilution fridges, by comparison, can only cope with much narrower temperature ranges. It provides a flexible platform for addressing the scaling up of advanced quantum hardware solutions. 

Paragraf’s mK capable sensors will pave the way for more advanced scientific instruments, with Oxford Instruments set to become one of the first customers in this exciting new area.


Contact Details and Archive...

Print this page | E-mail this page